MODEL | | | |
INPUT |
Nominal Input Voltage | |
Acceptable Input Voltage Range | |
Working Voltage Range | |
Maximum Input Current | | | |
Frequency Range | |
Input Power Factor | > 0.99 @nominal voltage (100% load) |
OUTPUT |
Output Current Range (based on 2-output) | | | |
Output Voltage Range | 200~750VDC (600~750VDC in constant power mode) |
Power Module | | | |
Efficiency | |
Module Output Current Unbalancce | |
Module Output Voltage Ripple | |
Module Output Voltage Precision | |
MModule Output Current Precision | |
Connector Single Mode (max.) | CCS2 (60kW) ChAdeMO (50kW) | CCS2 (120kW) ChAdeMO (50kW) | CCS2 (150kW) ChAdeMO (50kW) |
Connector Double Mode (max.) | CCS2 (30kW) ChAdeMO (50kW) | CCS2 (60kW) ChAdeMO (50kW) | CCS2 (90kW) ChAdeMO (50kW) |
Power Distribution | Single plug mode / Average output mode |
PROTECTION |
Charger Safety Protection | Over/Under voltage, overload, output power limit function, short
circuit, anti-access, earth leakage, lightning and overheat
protection |
Interface Safety Portection | Circuit discharge function, insulation monitoring device (IMD) and
battery reverse parity protection |
USER INTERFACE |
Status Indiators | Power on, charging and fault |
Communication Protocol | |
Connection Communication Mode | In accordance with DIN 70121 and ISO 15118 standard |
Connection Standard | CCS2 (IEC61851-23) and CHAdeMO 1.0 |
ENVIRONMENT |
Operating Temperature | |
Humidity | |
Altitude | |
Noise Level | |
PHYSICAL |
IP Protection | |
Cable Length | |
Dimension, D x W x H (mm) | 750 x 530 x 1685, excluding plug and cable |
Net Weight (kgs) | | | |
